Which Concrete mix information to be supplied by the Purchaser as per IS code??

 IS code के अनुसार Ready mix Concrete supplier को कौन कौन सी जानकारी Ready mix concrete के लिए कांट्रेक्टर को देनी चाहिए। as per IS Code 4926: 2003 

Or Which Concrete mix information to be supplied by the Purchaser?

किसी भी कंक्रीट मिक्स सप्लायर को कंक्रीट मिक्स के लिए  निम्न जानकारी कंक्रीट लेने वाले से ली जानी चाहिए as per IS Code 4926: 2003

ANNEX D के(Clauses 7.2 and 7.3.1) के  अनुसार 

1. RMC:......

2. Contractor:.........

3. Site......

4.Grade (N/mm²) (Characteristic strength).......

5. Minimum Cement Content (kg/m³)........

6. Mineral Additives (Pulverized fuel ash/Slag/Others) (kg/m³)........

7. Maximum Free Water-Cement Ratio.........

8. Nominal Maximum Aggregate Size.......

9. Cement Type and Grade (if preferred)........

10. Target Workability [Slump(mm)].......

11. Target Workability at Site.........

12. Maximum Temperature of Concrete at the Time of Placing........

13. Class of Sulphate Resistance (if applicable)........

14. Exposure Condition (if applicable)........

15. Class of Finish (if applicable)........

16. Mix Application........

17. Method of Placing........

18. Any Other Requirements (Early strength workability retention, permeability testing, chloride content restriction, maximum cement content, etc).........

19. Concrete Testing (Frequency)......

20.Material's Testing (any non- routine requirements)......

21. Alternatives to be Offered: YES/NO........

22. Method of Curing to be Used by Contractor.......

23. Quantity(m³)........

Note: किसी अन्य अथवा अधिक जानकारी के लिए किसी दूसरे प्रोफार्मा का प्रयोग किया जा सकता है।